Tannoy CMS 601
Tannoy CMS 601
Tannoy CMS 601
Tannoy CMS 601
Tannoy CMS 601

Tannoy CMS 601

€660.00
VAT included

Financia tu compra

cuotas
€82.33 / mes en 9 cuotas

Tannoy CMS 601. In-ceiling speaker.

Quantity
In Stock

  • Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente) Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente)
  • Política de envío (editar con el módulo Información de seguridad y confianza para el cliente) Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)
  • Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente) Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)

CMS 601

The CMS 601 is a full bandwidth; high power and high sensitivity ceiling monitor system; a mid-sized unit that is specifically designed for applications requiring the combination of higher quality sonic performance for music and speech reinforcement and exceptional reliability.

The design comprises a 165mm (6.5”) ICT™ transducer mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. Spring loaded self-aligning clamps make for quick and easy installation,Read More

Features

    • 165mm (6.5") ICT transducer for greater durability and longevity
    • High power and high sensitivity with extended frequency response
    • Wide, controlled constant directivity dispersion for optimum coverage
    • Does not suffer from massive loss of energy in the vertical plane at crossover caused by two way discreet designs
    • UV/weather resistant UL94V-0 ABS front baffle
    • Blind Mount and Pre Install options
    • Low insertion loss 30 W line transformer
    • Easily accessible tapping switch on front baffle
    • Packaged with tile rails and C-ring for quick and easy installation and simple stocking logistics
    • Five year warranty

Applications

  • Ballrooms and convention Centres
  • Bars & Restaurants
  • Casinos
  • Conference rooms
  • Corporate AV
  • Fitness Centres & Leisure Facilities
  • Hotels
  • Museums & Galleries
  • Retail Spaces & Malls
  • Transport Hubs
SYSTEM
Frequency Response (-3dB) (1) BM Back can 78Hz - 22kHz
Frequency Range (-10dB) (1) BM Back can 51Hz - 24kHz
Frequency Range (-10dB) (1) PI Back can 46Hz - 24kHz
System Sensitivity (1W @1m) (2) 91dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 92 degrees
Directivity Factor (Q) 7.1 averaged 1kHz to 6kHz
Directivity Index (DI) 7.9 averaged 1kHz to 6kHz
Rated Maximum SPL Average: 108dB
Peak: 112dB
Power Handling (3) Average: 60W
Programme: 120W
Peak: 240W
Recommended Amplifier Power 120W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch) 70V: 60W / 30W / 15W / 7.5W/OFF
& low impedance operation
100V: 60W / 30W / 15W / OFF
& low impedance operation
Crossover 7kHz inductively coupled
TRANSDUCERS
Low Frequency 1 x 165mm (6.50") mineral loaded
polypropylene ICT™
High Frequency 1 x ICT™ aluminium dome
PHYSICAL
Enclosure Back Can: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure
for load bearing safety bond
Clamping Design Min / Max Clamping Range: 8.0mm (0.32") / 29.0mm (1.14")
Recommended Clamp Torque: 1.5Nm
Back Can Options Blind Mount (BM): Complete with fixed back can
Pre Install (PI): Separate back can for pre installation
Cable Entry Options Cable clamp & squeeze connector for
conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions: 19 / 22 / 28mm (0.75” / 0.87” / 1.10”)
Connectors Removable locking connector with screw
terminals with "loop through" facility
Safety Agency Ratings UL-1480, UL-2043, CE
BM Hole Cutout Diameter 253mm (9.96")
PI Hole Cutout Diameter 253mm (9.96")
Dimensions Bezel diameter: 280mm (11.02")

BM model: Front of ceiling to rear of back can 258mm (10.16")
BM model: Front of ceiling to top of safety loop 275.30mm (10.84")

PI model: Front of ceiling surface to rear of speaker unit 95.50mm (3.76")
PI model: Front of accessory back can bezel to top of safety loop 168.50mm (6.60")
Net Weight (ea) CMS601 BM: 6.50kg (14.33lbs)
CMS601 PI: 4.00kg (8.82lbs)
PI back can: 3.685kg (8.06lbs)
Included Accessories C Ring
Tile bridge
Paint mask
Cutout template
Grille
Optional Accessories Plaster (mud) ring
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test

5010000047

16 other products in the same category:

special ofers for subscribers

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.

Free delivery

Nam liber tempor cum soluta nobis elefend option congue nihil imperdiet.

money guarantee

Nam liber tempor cum soluta nobis elefend option congue nihil imperdiet.

online support

Nam liber tempor cum soluta nobis elefend option congue nihil imperdiet.

SELECT id_product FROM ps_product WHERE id_product > 4389 ORDER BY id_product ASC LIMIT 0,5